Table of Contents
Advertisement
Grey Headline (continued)
TANDBERG's FindMe™ user guide
If no devices are configured for a
!
FindMe name, all calls to that name
will be rejected.
Username
The username for this FindMe account.
FindMe name
The FindMe name being configured.
Type
Select whether this FindMe name is to apply
to an
individual
or a
group of
people. This
will affect how calls are diverted to the
Busy
devices.
Change Password
Click here to change the password used to
access your FindMe account. You will be taken
to a new page where you can enter the new
password.
Log Out
Click here to exit the FindMe page.
Adding a device to a list
You can have up to five devices in each list. To add a device to any of the lists, enter one of the
following in any of the available fields:
•
for video endpoints: enter any alias with which the device is registered.
•
for 3G mobile phones: to route video to your mobile phone, you must have a 3G gateway - enter
the gateway's prefix followed by the mobile phone number. To route voice only, enter the mobile
phone number along with any prefixes required by your dial plan for external calls.
•
for telephones: enter the extension number (for internal calls) or telephone number, along with
any necessary prefixes.
Overview and
Introduction
Getting started
status
D14049.05
February 2009
Configuring your FindMe user account
Save Changes
Click here to update your FindMe account with any changes.
System
VCS
Zones and
configuration
configuration
neighbors
Busy Devices
For an individual, list all the device(s) that will
ring immediately if
Primary
list are busy.
Removing a
For a
group of
people, list all the device(s) that
device
will ring immediately if
To remove a
Primary
list are busy. (If
device from
the Primary list are busy, the rest will continue
a list, delete
to ring for the specified time before the call will
it from the
divert to the devices listed here.)
relevant
If no devices are listed in this section, the
field and
caller will get a busy response if any/all of the
click
Save
Primary
devices are busy.
Changes.
Call
Bandwidth
processing
control
153
TANDBERG
VIDEO COMMUNICATIONS SERVER
Primary Devices
List the all the device(s) that will ring when your
FindMe name is first dialed.
If more than one device is listed here, they will
all ring at the same time.
Ring the primary devices
Select the amount of time in seconds you wish
the devices in the
Primary
call is diverted. Alternatively, you can specify
that the devices will ring
until the caller hangs
up.
No Answer Devices
List all the device(s) that will ring if none of the
devices in the
Primary
list are answered within
the specified time.
If no devices are listed here, the caller will
receive a "no answer" response if none of the
Primary
devices are answered.
If you have selected a
Timeout period
until caller hangs
up, you will not be able to list
any devices here.
Ensure that none of
the
are set to Autoanswer.
any
of the devices in the
If they are, the system will
consider the call to have been
answered when Autoanswer is
all
of the devices in the
initiated, and so it will not
some
of the devices in
divert the call to any other
devices.
Firewall
Applications
Maintenance
traversal
ADMINISTRATOR GUIDE
list to ring before the
of
ring
Primary
devices
Appendices
Advertisement
Table of Contents
