Events And Levels - TANDBERG Video Communication Server Administrator's Manual

Table of Contents

Advertisement

Grey Headline (continued)
Status

Events and levels

Event
Description
Admin Session Finish
An administrator has logged off the system.
Admin Session Login Failure
An unsuccessful attempt has been made to log in as an administrator. This could be because an incorrect username or password (or both) was entered.
Admin Session Start
An administrator has logged onto the system.
Application Failed
The VCS application is out of service due to an unexpected failure.
Application Start
The VCS has started. Further detail may be provided in the
Application Warning
The VCS application is still running but has experienced a recoverable problem. Further detail may be provided in the
Beginning System Backup
A system backup has started.
Beginning System Restore
A system restore has started.
Call Answer Attempted
An attempt to answer a call has been made.
Call Attempted
A call has been attempted.
Call Connected
A call has been connected.
Call Diverted
A call has been diverted.
Call Disconnected
A call has been disconnected.
Call Rejected
A call has been rejected. The
Call Rerouted
The VCS has
Completed System Backup
A system backup has completed.
Completed System restore
A system restore has completed.
Decode Error
A syntax error was encountered when decoding a SIP or H.323 message.
Eventlog Cleared
An operator cleared the Event Log.
External Server
Communication with an external server failed unexpectedly. The
Communication Failure
rejected'. Servers concerned are:
Hardware Failure
There is an issue with the VCS hardware. If the problem persists, contact your TANDBERG support representative.
Overview and
Introduction
Getting started
status
D14049.05
February 2009
Reason
event parameter contains a textual representation of the H.225 additional cause code.
Call Routed mode
set to
Optimal
DNS
LDAP servers
Neighbor Gatekeeper
NTP servers
Peers
System
VCS
configuration
configuration
Event Log
Detail
event parameter.
and has removed itself from the call signaling path.
Detail
event parameter should differentiate between 'no response' and 'request
Zones and
Call
Bandwidth
neighbors
processing
control
45
TANDBERG
VIDEO COMMUNICATIONS SERVER
Detail
event parameter.
Firewall
Applications
Maintenance
traversal
ADMINISTRATOR GUIDE
Level
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Appendices

Advertisement

Table of Contents
loading

Table of Contents