Table of Contents
Advertisement
Grey Headline (continued)
Installation
What's in the box?
To avoid damage to the unit during transportation, the
TANDBERG VCS is delivered in a special shipping box, which
should contain the following components:
•
TANDBERG VCS
•
CD containing VCS Administrator Guide and other
documentation
•
Getting Started Guide
•
Registration card
•
Rack ears and screws
•
Cables:
•
power cables
•
ethernet cable
•
shielded serial cable
Please report any discrepancies to your TANDBERG
representative immediately.
A brief yet concise description of the procedure to get
you up and going can be found in the Getting Started
Guide accompanying your TANDBERG product.
Shielded serial cable
To control the VCS using a
direct connection to a PC,
connect the serial cable
between the VCS's DATA port
and the COM port on a PC.
Overview and
Introduction
Getting started
status
D14049.05
February 2009
Installation site preparations
•
Make sure that the VCS is accessible and that all cables can
be easily connected.
•
For ventilation: leave a space of at least 10cm (4 inches)
behind the VCS's rear panel and 10cm (4 inches) in front of
the front panel.
•
The room in which you install the VCS should have an ambient
temperature between 0ºC and 35ºC (32ºF and 95ºF) and
between 10% and 90% non-condensing relative humidity.
•
Do not place heavy objects directly on top of the VCS.
•
Do not place hot objects directly on top, or directly beneath
the VCS.
•
Use a grounded AC power outlet for the VCS.
Connecting the cables
Ethernet cable
To use the VCS over IP,
connect the ethernet cable
from the
VCS to your network.
The
LAN 2
used if you have the Dual
Network Interfaces option
installed.
The
LAN3
are not used.
System
VCS
Zones and
configuration
configuration
neighbors
LAN 1
port on the
port can also be
Soft power button
and
LAN4
ports
Call
Bandwidth
processing
control
21
TANDBERG
VIDEO COMMUNICATIONS SERVER
General installation precautions
•
The socket outlet shall be installed near to the equipment
and shall be easily accessible.
•
Never install cables without first switching the power OFF.
Power switch
Power cable
Connect the system power
cable to an electrical
distribution socket.
Firewall
Applications
Maintenance
traversal
ADMINISTRATOR GUIDE
Appendices
Advertisement
Table of Contents
