Table of Contents
Advertisement
Grey Headline (continued)
Status
System information
The
System Information
page provides details of the software, hardware, and time settings of the
VCS.
To view the
System Information
page:
•
Status > System > Information
Some of the items on this page are configurable, and contain links to the page where they
can be configured. For example, clicking on
keys
page, from where you can install new optional features.
The page displays the following information:
System information
System name
The name that has been assigned to the VCS.
Product
This will be TANDBERG VCS.
Software version
The version of software that is currently installed on the VCS.
Software build
The build number of this software version.
Software release
The date on which this version of the software was released.
date
Software name
The internal TANDBERG reference number for this software release.
Software options
The maximum number of calls, and the availability of additional VCS
features such as User Policy, Device Provisioning (TMS Agent) and Dual
Network Interfaces, are controlled through the use of
section shows all the optional features currently installed on the VCS.
Hardware version
The version number of the hardware on which the VCS software is installed.
Hardware serial
The serial number of the hardware on which the VCS software is installed.
number
Time Information
Up time
The amount of time that has elapsed since the system last restarted.
System time (UTC)
The time as determined by the NTP server.
If no NTP server has been configured, this will show
Time zone
The time zone that has been configured on the
Local time
If an NTP server has been configured, this will be a combination of the NTP
server time (which is UTC) and the local time zone.
If no NTP server has been configured, this will show the time according to
the VCS's operating system.
Overview and
Introduction
Getting started
status
D14049.05
February 2009
Software options
will take you to the
Option
option
keys. This
Time Not
Set.
Time
page.
System
VCS
Zones and
configuration
configuration
neighbors
The
Ethernet Status
page provides details of the MAC address and ethernet speed settings of the
VCS.
To view the
Ethernet
page:
•
Status > System > Ethernet
The page displays the following information for the LAN 1 port and, if the Dual Network Interfaces
option key has been installed, the LAN 2 port:
MAC address
The MAC address of the VCS's ethernet device for that LAN port.
Speed
The speed of the connection between the LAN port on the VCS and the
ethernet switch.
Call
Bandwidth
processing
control
31
TANDBERG
VIDEO COMMUNICATIONS SERVER
Ethernet status
Firewall
Applications
Maintenance
traversal
ADMINISTRATOR GUIDE
Appendices
Advertisement
Table of Contents
