Quick Guide To Vcs Traversal Client - Server Configuration; Overview; Vcs Control (Client); Vcs Expressway (Server) - TANDBERG Video Communication Server Administrator's Manual

Grey Headline (continued)
Quick guide to VCS traversal client - server configuration

Overview

Full details of how to configure a VCS Control
and VCS Expressway as traversal client and
server respectively are given in the following
pages. However, the basic steps are:
!
Ensure the VCS Control has been
configured with an Authentication
username and Authentication password to use
as its External Registration Credentials. These
can be added or edited using VCS configuration
> Authentication > Configuration (or by clicking
on the Edit Authentication Username/Password
link in the Edit zone page for an existing
traversal client zone).
"
On the VCS Expressway, create a
traversal server zone (this represents the
incoming connection from the VCS Control). In
the Client authentication username field, enter
the VCS Control's Authentication username.
#
On the VCS Expressway, add the VCS
Control's authentication username and
password as credentials in the authentication
database. These can be added or edited using
VCS configuration > Authentication > Local
Database, or by clicking on the Add/Edit Local
Authentication Database link in the Edit zone
page.
$
On the VCS Control, create a traversal
client zone (this represents the
connection to the VCS Expressway). Enter the
VCS Expressway's IP address or FQDN in the
Peer 1 address field.
%
On the VCS Control, configure all the
modes and ports in the Protocol section
to match identically those of the traversal
server zone on the VCS Expressway.
Overview and
Introduction Getting started
status
D14049.05
February 2009

VCS Control (client)

!
System VCS Zones and
configuration configuration neighbors
#
"
%
$
Call Bandwidth
processing control
133
TANDBERG VIDEO COMMUNICATIONS SERVER

VCS Expressway (server)

Firewall
Applications Maintenance
traversal
ADMINISTRATOR GUIDE
Appendices