Table of Contents
Advertisement
LCD Panel: System Status, Shutting Down and Restarting
System Status
The LCD panel display indicates the current status of the
Content Server.
Online. The Content Server is ready to accept calls and
transcode outputs. No calls or transcoding jobs are currently in
progress.
1-5 calls.
Calls are in progress on the Content Server.
Transcoding.
A transcoding job is in progress on the Content
Server.
1-5 calls
(cnfg). Calls are in progress and the Content Server
is in Reloading Configurations mode. In this mode, the Content
Server will not accept new calls.
Idle.
The Content Server is in Idle mode because an
administrator is running the TCS wizard. In Idle mode, the
Content Server will not accept new calls or process new
transcoding jobs. The LCD panel will also display '1-5 calls (idle)'
or 'trans (idle)' if there is a call or a transcoding process in
progress when the wizard starts.
Error.
The Content Server is out of disk space or has lost
connection to the NAS.
No Network.
The Content Server has no connection to the
network.
System status is also displayed on the Server Overview
page, under the Administrator Settings menu.
Do not Shutdown or Restart the Content Server
While Calls Are In Progress!
We do not recommend shutting down or restarting the
!
Content Server while calls are in progress. If the Content
Server is in a call and the server is restarted or shut
down, calls in progress will fail and will not be recorded.
Table of
Introduction
Installation
Contents
D13898.08
MAY 2009
IP Settings. See the
IP Settings
Commands
Version Info
Display information on the
version currently installed.
TCS
Backing up and
Quick Setup
Administration
Restoring
Command Menu Structure
Installation
section.
Restart?
No
Yes
Shutdown?
No
Yes
full Restore?
No
Yes
- Restore Defaults -
full Restore
Config Restore?
Config Restore
No
Yes
Restoring Default Settings
is described on the next
Administrator
Conference
Settings
Setup
25
TANDBERG
Restarting the Content Server
1.
Press
Enter
to display the Main Menu
screen
2.
From the Main Menu screen, use the
Up
or
Down
arrow to select Commands
3.
Press
Enter
to confirm your selection
4.
From the Commands menu, use the
or
Down
arrow to select Restart and
press
Enter
You will be asked to confirm this
5.
action on the following screen. At the
Restart? prompt, use the
arrow to select Yes and press
confirm.
Shutting Down the Content Server
Press
Enter
to display the Main Menu
1.
screen
2.
From the Main Menu screen, use the
Up
or Down arrow to select Commands
3.
Press Enter to confirm your selection
page.
4.
From the Commands menu, use the
or
Down
arrow to select Shutdown and
press
Enter
5.
You will be asked to confirm this
action on the following screen. At the
Shutdown? prompt, use the
Down
arrow to select Yes and press
Enter
to confirm.
6.
IMPORTANT—WAIT UNTIL THE LCD
PANEL DISPLAYS 'PowER off' BEFORE
SWITCHING THE POWER BUTTON OFF.
View
Appendices
Conferences
CONTENT SERVER
ADMINISTRATOR GUIDE
Up
Up
or
Down
Enter
to
Up
Up
or
Advertisement
Table of Contents
