Installing the Content Server
Preparing for Use
What's in the Box?
To avoid damage to the unit during transportation,
the Content Server is delivered in a special
shipping box, which should contain the following
components:
•
CD with User Guide and other documentation
•
Rack-ears, screws and screwdriver
•
Cables
•
Power cable
•
Ethernet cable
•
TANDBERG Content Server.
Kindly report any discrepancies to your
TANDBERG Representative immediately.
Installation Site Preparations
•
Make sure that the Content Server is
accessible and that all cables can be
easily connected
•
For ventilation: Leave a space of at least
10cm (4 inches) behind the Content
Server's rear panel and 10cm (4 inches) in
front of the front panel
•
The room in which you install the
Content Server should have an ambient
temperature between 0ºC and 35ºC (32ºF
and 95ºF) and between 10% and 90% non-
condensing relative humidity
•
Do not place heavy objects directly on top
of the Content Server
•
Do not place hot objects directly on top, or
directly beneath the Content Server
•
Use a grounded AC power outlet for the
Content Server.
Table of
What's New in
Trademark/
Contents
this Version?
Licenses
D 13898.04
DECEMBER 2006
Before starting the rack mounting please
make sure the TANDBERG Content
Server is placed securely on a hard flat
surface.
Attach the brackets to the Content
Server on both sides of the unit.
Connect a LAN cable from
LAN 1
the
connector
on the Content Server
to your network.
The
LAN
,
and
connectors are
not used and should
be left open.
Safety/
Introduction
Installation
Environmental
Rack Mounting (optional)
Disconnect the AC power cable, if
applicable.
Insert the Content Server into a 19" rack, and secure with screws in the front (four screws).
Connecting Cables
Connect the AC power
cable to an electrical distribution
socket. Press the power switch
button at the back side to
turn on the Content Server.
On the front panel of the system
the power indicator LED, marked
Pwr
, will light up.
Administrator
Quick Setup
Operation
1
TANDBERG
Make sure that the mounting space is
prepared according to the
Site Preparations
below left.
10 cm
1
to
Conference
View
Settings
Setup
Conferences
CONTENT SERVER
USER GUIDE
Installation
10 cm
Appendices