Table of Contents
Advertisement
Server Overview
About Server Overview
The Server Overview page allows administrators to:
•
View Content Server Status
•
View Server Disk Space
•
Content Server Information
•
View details of the Database Location
•
View details of the Media Storage Location
•
Upgrade the Content Server Software
This page is automatically refreshed every 10 seconds.
Content Server Status
Server
Mode. Server mode displays the current status of the
Content Server. The default mode is
Online.
Content Server can accept calls and transcode outputs.
Other modes include:
Reloading Configurations.
If Gatekeeper, Advanced H.323 or
SIP settings have been saved in Site Settings while the Content
Server was in call, the Content Server will stop accepting new
calls. When the call or calls currently in progress are completed,
Site Settings will be updated and Server Mode will automatically
change to Online. The administrator may also exit the Reloading
Configurations mode by ending all calls manually.
Idle.
The Content Server will stop accepting new calls and
processing new transcoding jobs when the TCS wizard is
running. To exit Idle mode, ensure that you have either fully
completed or cancelled the wizard.
Offline.
If the Content Engine service is not running, Content
Engine status will display a red exclamation mark, and server
mode will change to Offline. the Content Server will drop any
calls in progress and will not accept any new calls. To exit Offline
mode, start the TCS Content Engine service.
Error.
The Content Server will enter Error mode if it's out of disk
space, or if it has lost connection to the NAS.
If the Content Server is out of disk space (5% disk space free),
the Content Server will drop any calls in progress and will not
accept any new calls or process transcoding jobs. To exit Error
mode, free up disk space on the drive or drives.
If the Content Server was on a NAS, but cannot contact it, check
the NAS and ensure that it is connected to the network.
Table of
Introduction
Installation
Contents
D13898.08
MAY 2009
The Server Overview Page - Content Server Status
In this mode the
TCS
Backing up and
Quick Setup
Administration
Administrator
Conference
Restoring
Settings
Setup
83
TANDBERG
Content Engine Status.
Displays the current
Content Engine service status. A green tick
is displayed if the service is running. If the
service is not running, a red exclamation
mark and the last time and date the service
contacted the database is displayed.
Transcode Engine Status.
Transcode Engine service status. A green
tick is displayed if the service is running. f
the service is not running, a red exclamation
mark and the last time and date the service
contacted the database is displayed.
Current Calls.
The graphic displays beige
placeholders for calls with live streaming
outputs and orange placeholders for calls with
on demand outputs only.
Call list.
Displays a list of live conference
names. Click on a conference name to go to
the Edit Conference page for this call.
Currently transcoding.
A graphic indicates if
transcoding is currently taking place.
Transcoding Job List.
Displays a list of
conference names with outputs that are
currently being transcoded. Click on a
conference name to go to the Edit Conference
page for this conference.
End all Calls.
This button is displayed if there
are current calls in progress. Click this button
to end all calls.
View
Appendices
Conferences
CONTENT SERVER
ADMINISTRATOR GUIDE
Displays the current
Advertisement
Table of Contents
