2-8. Replacing Boards
2-8-1. CD-61 Board
1. Open the outside panel.
(Refer to Section 1-4.)
2. Disconnect the fl exible card wires from the
connectors CN202 and CN203 on the CD-61
board.
3. Remove the four screws (PSW3 x 6) to
remove the CD board assembly.
4. Remove the two screws (PSW2 x 5) to
remove the ENC-112 board.
5. Install a new CD-61 board by reversing the
steps above.
HXC-100/V1 (E)
CD-61 board
CD board
assembly
ENC-112 board
PSW 3 x 6
CN202
CN203
PSW 2 x 5
PSW 3 x 6
2-13