1-4. Opening/Closing the Side Panel
Inside Panel
1. Loosen the four screws with stopper to detach the
inside panel.
2. Reinstall the inside panel by reversing the step above.
n
Turn all the toggle switches to the front side, and then
attach the inside panel.
Outside Panel
1. Loosen the fi ve screws with stopper and open the
outside panel in the arrow direction.
2. Hook the outside panel to potion A (two locations) to
fi x it.
n
Be careful so that the fl exible card wires between the
TX-126 and CD-61 boards do not shift or come off.
3. Close the outside panel by reversing the steps above.
1-16
Toggle switches
Inside panel
A
Screws with stopper
Screws with stopper
Outside panel
Screws with stopper
Flexible card wires
A
HXC-100/V1 (E)