Sony HXC-100 Service Manual page 127

INTERCOM
<INTERCOM> S13 TOP
INCOM FILE : UCJ
READ FILE
INCOM LEVEL : +6dB
RTS SW :(NORMAL)
RTS/CC : RTS
ITEM
INTERCOM FILE
READ FILE
INTERCOM LEVEL
RTS SW
RTS/CC
SERIAL NO.
<SERIAL NO.>
MODEL: HXC-100
NO. : 10001
DEST : UC
The SERIAL NO. menu is used to set the model name, serial number, and destination.
HXC-100/V1 (J)
Description
Setting of intercom panel destination
Perform FILE menu → REFERENCE → ALL
Automatic setting:
PRESET
UC → UCJ
Manual setting:
CE → CE
J → UCJ
Not used
Setting of intercom output level
n
Do not change the factory setting.
Indicates the position of RTS SW (S502) on the SY-363 board.
(NORMAL) : The intercom connector is set to 4W (HEADSET).
(RTS) : The intercom connector is set to 2W.
n
. Do not set RTS SW to RTS with the headset connected.
The headset will break down because the power (approx.
26 V) for belt pack is supplied.
. After this setting is made, turn off the power and then restart
the unit.
Setting of the 2W interface level
RTS: Set for RTS
CC: Set for Clear-Com
n
After this setting is made, turn off the power and then restart
the unit.
S14 TOP
Factory setting
UCJ
+6dB
(NORMAL)
RTS
5-5