Sony HXC-100 Service Manual page 99

4. Place the cursor at "RECORD V.LINE" and press the rotary encoder to display "RECORD DATA OK? YES → NO."
ITEM: RECORD V.LINE → EXEC
5. Choose "YES" and press the rotary encoder. A message "LEVEL SETTING" appears. Place the cursor at "V.LINE
LEVEL" and make fi ne adjustment while paying attention to avoid overcompensation (black lines) and insuffi cient
compensation (white lines).
ITEM: V.LINE LEVEL → 127 to 0
6. Confi rm that the vertical line has already disappeared, and then place the cursor at "RECORD V.LINE" again. Then
choose "YES" with the rotary encoder.
7. Press the rotary encoder. A message "COMPLETE!" appears and the compensation data is stored.
n
If the data is stored at an incorrect compensation address, delete the V.LINE data.
ITEM: DELETE V.LINE → EXEC
8. To compensate other vertical lines, repeat steps 1 to 7.
Setting after Adjustment
ITEM: RPN CURSOR → OFF
HXC-100/V1 (E)
3-33