Cn-3069 Board - Sony HXC-100 Service Manual

2-8-2. CN-3069 Board

1. Remove the two screws and slide the handle
cover slightly (Arrow 1).
2. Remove the handle cover so that the hook is
released from the hole in the handle subas-
sembly (Arrow 2).
3. Disconnect the harness from the connector
CN2 on the LE-355 board.
4. Remove the four screws (B3 x 10) and
remove the handle subassembly in the arrow
direction.
5. Remove the two screws (M2.6 x 5) and lift
the CN-3069 board.
6. Disconnect the harness from the connector
CN2 on the CN-3069 board.
7. Install a new CN-3069 board by reversing the
steps above.
2-14
Handle cover
Hook
Hole
Handle subassembly
LE-355 board
CN2
B 3 x 10
M 2
2
1
B 3 x 10
CN-3069 board
CN2
HXC-100/V1 (E)
M 2.6 x 5