Omron SYSDRIVE 3G3HV SERIES User Manual page 192

Appendix
Function No.
Digital Op-
n007
erator func-
tion selec-
tion
n008
n009
V/f pattern
n010
selection
n011
V/f pattern n012
selection
n013
n014
n015
n016
n017
n018
Note 1. With 400-V Inverters, the setting range upper limits and default settings are double those
shown in the table.
Note 2. The default settings for Inverters of 55 kW or more are as follows:
n016 = 12.0/24.0, n018 = 6.0/12.0
Name
Operation 0: Inhibits Operation Mode Selection Key
direction selec- from functioning.
tion key permit/ 1: Permits Operation Mode Selection Key
inhibit to function.
Stop Key func- 0: The STOP/RESET Key will function
tion selection only when the Inverter is running with
the run command through the Digital
Operator.
1: The STOP/RESET Key will function
anytime.
Frequency ref- 0: Permits frequency reference set with
erence setting the Digital Operator to be valid without
selection Enter Key input.
1: Permits frequency reference set with
the Digital Operator to be valid with En-
ter Key input.
V/f pattern 0to E: Selects from 15 fixed V/f patterns.
selection F: Selects optional V/f pattern with n012
to n018 settings.
Rated input Set rated input voltage of motor with 1 V
voltage of mo- units.
tor
(see note)
Maximum fre- Voltage
(V)
quency (FMAX)
Maximum volt-
age (VMAX)
(see note)
Maximum volt-
The V/f pattern will be a straight line if
age frequency
there is no difference between n015 and
(FA)
n017 in set value, in which case the set 017 i
Intermediate
value of n016 will be ignored.
output frequen-
cy (FB)
Intermediate
output frequen-
cy voltage (VC)
(see note)
Minimum out-
put frequency
(FMIN)
Minimum out-
put frequency
voltage (VMIN)
(see note)
Description
t l i hi h th
Chapter 6
Setting
range
0, 1
[1]
0, 1
[1]
0, 1
[1]
0 to F
[1]
150.0 to
255.0
[200.0]
50.0 to
400.0
[60.0]
0.1 to 255.0
[200.0]
(See note
Frequency
1.)
(Hz) (Hz)
0.2 to 400.0
[60.0]
t
0.1 to 399.9
[3.0]
0.1 to 255.0
[15.0] (See
note 1, 2.)
0.1 to 10.0
[1.5]
0.1 to 50.0
[10.0] (See
note 1, 2.)
Refer-
ence
page
3-57
3-58
3-58
3-58
3-60
3-60
3-60
3-61
3-61
3-61
3-61
3-61
6-7