Omron SYSDRIVE 3G3HV SERIES User Manual page 103

Preparing for Operation
Function No.
Sequential in- n039
put function
selection
Sequential out-
n040
put function
selection
n041
3-46
Name
Multi-function 0to 22: Same as n035
input 5 (S6)
25: Up/Down command
S5 will be used for the up command,
S6 will be used for the down com-
mand, and value set with n038 will be
ignored.
26: Not used. (Do not set.)
27: PID input characteristic selection
(ON: Deviation multiplied by –1)
Multi-function 0: Error (ON: Error)
contact output 1: Running
1 (MA-MB-MC) 2: Frequency agreement
3: Optional frequency agreement
4: Optional frequency detection (ON:
Output frequency x n073)
5: Optional frequency detection (ON:
Output frequency x n073)
6: Overtorque (ON: Detected)
7: Overtorque (OFF: Detected)
8: Baseblock
9: Operation mode (ON: Digital Opera-
tor/Frequency reference)
10: Inverter ready
11: Timer function output (Set with n077
and n078)
12: Error retrying
13: Inverter/Motor overload warning
14: Frequency reference loss (ON: Fre-
quency reference has dropped by
90% or more within 0.4 s)
15: Not used
16: PID feedback loss (Detecting method
can be set with n093 and n094)
17: Heating heat sink (ON: OH1)
Multi-function Same as n040
contact output
2 (M1-M2)
Description
Chapter 3
Setting Refer-
ence
range
page
2 to 27 3-18
[10]
0 to 17 3-74
[0]
0 to 17 3-74
[1]