Fip-1. 38 Load Tray 1 024-965 / Illegal Settings - Dell 2135cn Service Manual

FIP-1. 38 Load Tray 1 024-965 / Illegal Settings

Step
Possible causative parts:
SENSOR PHOTO (PL3.2.13)
ACTUATOR NO PAPER (PL3.2.19)
HARN ASSY L SIDE (PL10.4.18)
PWBA MCU (PL10.7.7)
Checking the paper for loading and setting
Check that the loaded paper meets the print job.
Check that the paper setting to require the print job meets
1
the specification.
Does the error still occur after reloading the paper and
changing the paper settings that requires the print job?
Checking the ACTUATOR NO PAPER for shape and
operation
2 Pull the CASSETTE ASSY 250 out.
Are the shape and operation of the ACTUATOR NO PAPER
normal?
Checking the Cassette No Paper Sensor (SENSOR
PHOTO) for operation
Pull the CASSETTE ASSY 250 out.
Does the number on the screen increase by one, when the
3
actuator (ACTUATOR NO PAPER) of the Cassette No
Paper Sensor (SENSOR PHOTO) is operated?
Checked by [Digital Input]-[DI-01] of [IOT Diag] in [Printer
Diag] of diagnosis.
Checking the connectors of the SENSOR PHOTO
(Cassette No Paper Sensor) for connection
Check the connections between the PWBA MCU and
SENSOR PHOTO.
Are P/J23 and P/J234 connected correctly?
4
Checking the HARN ASSY L SIDE for continuity
Disconnect J23 from the PWBA MCU.
5
Disconnect J234 from the SENSOR PHOTO.
Is each cable of J23 <=> J234 continuous?
Version 2 2008.03.31
Check
1 - 267
Chapter 1 Troubleshooting
Remedy
Yes
Go to step 2. End of work.
Reseat the
ACTUATOR NO
PAPER. If broken
Go to step 3. or deformed,
replace the
ACTUATOR NO
PAPER.
Replace the
PWBA MCU.
(Refer to Removal Go to step 4.
31/ Replacement
29.)
Reconnect the
connector(s) P/
Go to step 5.
J23 and/or P/J234
correctly.
Replace the
Go to step 6. HARN ASSY L
SIDE.
No