Flows 23 Memory Full 016-700 - Dell 2135cn Service Manual

Flows 23 Memory Full 016-700

Errors may be avoided by the following measures:
- When the RAM disk is set to "Available", cancel it or reduce the disk capacity.
- Add the optional memory.
Checking optional memory.
Is the optional memory module
installed?
Yes
Print a System Settings page to
verify the capacity of optional
memory. (Refer to NOTE)
Is memory capacity increased?
NOTE: Operation from printer
operation panel
1 Press until >SETUP
appears, and then press .
2 Press until >Reports
appears, and then press .
3 System Settings is displayed.
Press .
Yes
Checking after changing the
printer driver settings.
In the printer driver dialog box,
set Print Mode to "High Quality",
and Bitmap Smoothing to "On".
Does the error still occur when
printing?
Yes
Checking after changing the RAM
DISK settings.
Set RAM DISK to "100MB".
(Refer to NOTE)
Does the error still occur when
printing?
NOTE: Operation from printer
operation panel
1 Press until >SETUP
appears, and then press .
2 Press until >Admin Menu
appears, and then press .
3 Press until >System Settings
appears, and then press .
4 Press until >RAM Disk
appears, and then press .
Yes
The printer has reached its
processing capacity. Try dividing
the print data into smaller blocks
or converting the data to a
smaller format.
Version 4.3 2009.10.09
No
Checking after changing the
printer driver settings.
In the printer driver dialog box,
set Print Mode to "High Quality",
and Bitmap Smoothing to "On".
Does the error still occur when
No
printing?
If the memory
capacity has
not increased,
turn off the
Checking after installing the
printer, unplug
optional memory.
the power
Install additional memory.
cable, and
Does the error still occur when
reinstall the
printing?
optional
memory.
Print a System Settings page to
verify the capacity of optional
memory. (Refer to NOTE)
Is memory capacity increased?
No
NOTE: Operation from printer
operation panel
1 Press
appears, and then press .
2 Press
END
appears, and then press .
3 System Settings is displayed.
Press .
No
END
1 - 87
Chapter 1 Troubleshooting
No
Yes
No
Yes
No
until >SETUP
until >Reports
Yes
END
END
If the memory
capacity has
not increased,
turn off the
printer, unplug
the power
cable, and
reinstall the
optional
memory.