Dell 2135cn Service Manual page 702

Hide thumbs Also See for 2135cn:

Table of Contents

Chapter 3 Removal and Replacement Procedures (RRPs)

3) Attach the DRIVE ASSY PH to the

Note: Since three types of screws are used for securing the DRIVE ASSY PH, ensure that the

right screws are used at their right securing positions.

The securing positions for tap screws are marked with [T].

The securing positions for metal screws are marked with [M].

4) Secure the DRIVE ASSY PH to the

printer with the one screw (silver, M4,

6mm), the one screw (silver, M3, 6mm)

and the one screw (silver, tap, 8mm).

5) Route all the harness through the hooks

of the DRIVE ASSY PH, engage the

connector (P/J211) of the DRIVE ASSY

Chapters

Table of Contents