Dell 2135cn Service Manual page 580

Hide thumbs Also See for 2135cn:

Table of Contents

Chapter 3 Removal and Replacement Procedures (RRPs)

Removal 39 PLATE ASSY DUCT (PL10.6.1)

1) Remove the Tray 1. (Removal 1)

2) Open the COVER ASSY FRONT (PL10.2.1).

Note: Cover the drum of the PHD unit to avoid exposure to light.

3) Remove the PHD Unit. (Removal 3)

Note: The FUSER part is very hot. Take added care not to get burned when performing the

service operation.

4) Remove the FUSER ASSY. (Removal 9)

5) Remove the COVER ASSY SIDE R. (Removal 10)

6) Remove the COVER ASSY SIDE L. (Removal 14)

7) Remove the COVER POLE OUT. (Removal 15)

8) Remove the COVER ASSY ESS. (Removal 16)

9) Remove the COVER REAR. (Removal 17)

10) Remove the COVER TOP. (Removal 18)

11) Remove the SHIELD ASSY ESS. (Removal 22)

12) Remove the CHASSIS ASSY LVPS. (Removal 28)

13) Remove the COVER SCANNER LOW. (Removal 37)

14) Remove the COVER POLE IN. (Removal 38)

15) Release the seven clamps on the

PLATE ASSY DUCT (PL10.6.1) that fix

the harnesses of the HARN ASSY FUSER

(PL6.1.2) and the HARN ASSY

INTERLOCK (PL10.6.4) to the PLATE

Chapters

Table of Contents