Dell 2135cn Service Manual page 661

Hide thumbs Also See for 2135cn:

Table of Contents

Chapter 3 Removal and Replacement Procedures (RRPs)

Replacement 10 PWBA HVPS (PL10.7.1)

Note: Use the wrist strap to protect the PWB from the electrostatic.

1) Mate the notch and hole of the PWBA

HVPS with the tabs of the CHASSIS ASSY

HVPS, attach the PWBA HVPS.

2) Secure the PWBA HVPS to the

CHASSIS ASSY HVPS with the seven

screws (silver, with flange, 6mm).

3) Engage the connector (P/J161) of the

HARN ASSY HVPS to the PWBAHVPS,

route the HARN ASSY HVPS to the

EDGING SADDLE. Close the EDGING

Go to the next replacement step:

Replacement 11 UPPER UNIT (Reference only)

Chapters

Table of Contents