Chapter 3 Removal and Replacement Procedures (RRPs)
15) Remove the one screw (silver, 6m)
that fix the HARNESS ASSY GND
(PL7.1.5) to the DRIVE ASSY SUB,
remove the HARNESS ASSY GND.
16) Remove the one screw (silver, M4,
6mm) and the four screws (silver, tap,
8mm) that fix the DRIVE ASSY SUB to the
printer.
17) Remove the DRIVE ASSY SUB from
the printer.
3 - 67
Version 1
2008.02.01