Chapter 3 Removal and Replacement Procedures (RRPs)
Removal 47 KIT PIVOT (PL6.1.99)
1) Remove the Tray 1. (Removal 1)
2) Open the COVER ASSY FRONT (PL10.2.1).
Note: Cover the drum of the PHD unit to avoid exposure to light.
3) Remove the PHD Unit. (Removal 3)
Note: The FUSER part is very hot. Take added care not to get burned when performing the
service operation.
4) Remove the FUSER ASSY. (Removal 9)
5) Remove the COVER ASSY SIDE R. (Removal 10)
6) Remove the COVER ASSY SIDE L. (Removal 14)
Accesses Position (All the numbers show the procedure number.)
7), 8), 9)
10), 11)
7) Rotate the STOPPER PIVOT (PL6.1.3),
mate the tabs of the STOPPER PIVOT
with the notches of the DRIVE ASSY MAIN
(PL7.1.2).
3 - 97
Version 3
2008.06.13