Chapter 3 Removal and Replacement Procedures (RRPs)
Replacement 18 DISPENSER ASSY (PL5.1.1)
1) Insert the AUGER part of the
DISPENSER ASSY into the hole of the
printer, mate the hole of the DISPENSER
ASSY with the boss of the printer, and then
attach the DISPENSER ASSY.
2) Secure the rear side of DISPENSER
ASSY to the printer with the one screw
(silver, M4, 6mm).
3) Secure the DISPENSER ASSY to the
printer with the four screws (silver, tap,
8mm).
3 - 178
Version
2008.02.01