Chapter 3 Removal and Replacement Procedures (RRPs)
Replacement 35 PWBA LVPS (PL10.6.16)
Note: Use the wrist strap to protect the PWB from the electrostatic.
1) Mate the hole of the PWBA LVPS with
the SUPPORT PWB, secure the hooks of
the SUPPORT PWB.
2) Secure the PWBA LVPS to the printer
with the six screws (silver, with flange,
6mm).
3) Engage all the connectors of the PWBA
LVPS.
Go to the next replacement step:
Replacement 43 COVER REAR (PL10.1.5)
3 - 212
Version
2008.02.01