Dell 2135cn Service Manual page 556

Hide thumbs Also See for 2135cn:

Table of Contents

Chapter 3 Removal and Replacement Procedures (RRPs)

Removal 29 HARN ASSY SW PWR (PL10.7.8)

1) Remove the Tray 1. (Removal 1)

2) Open the COVER ASSY FRONT (PL10.2.1).

Note: Cover the drum of the PHD unit to avoid exposure to light.

3) Remove the PHD Unit. (Removal 3)

Note: The FUSER part is very hot. Take added care not to get burned when performing the

service operation.

4) Remove the FUSER ASSY. (Removal 9)

5) Remove the COVER ASSY SIDE R. (Removal 10)

6) Remove the COVER ASSY SIDE L. (Removal 14)

7) Remove the COVER POLE OUT. (Removal 15)

8) Remove the COVER REAR. (Removal 17)

9) Remove the COVER TOP. (Removal 18)

10) Remove the CHASSIS ASSY LVPS. (Removal 28)

11) Disengage the connector (P/J482) on

the BREAKER GFI (PL10.7.10), release

the clamp on the printer that fix the

harnesses of the HARN ASSY SW PWR

12) Release the hooks of the POWER

SWITCH to remove the POWER SWITCH,

remove the HARN ASSY SW PWR from

the printer.

Chapters

Table of Contents