Chapter 3 Removal and Replacement Procedures (RRPs)
Replacement 27 KIT DRIVE ASSY MAIN (PL7.1.98)
1) Attach the GEAR P2 to the shaft of
DRIVE ASSY SUB.
Note: Ensure that the GEAR P2 is
oriented to the direction shown in the
right.
2) Attach the DRIVE ASSY MAIN to the
printer.
Note: Since two types of screws are used for securing the DRIVE ASSY MAIN, ensure that the
right screws are used at their right securing positions.
The securing positions for tap screws are marked with [T].
The securing positions for metal screws are marked with [M].
3 - 196
Version
2008.02.01