4.1.3.5 In the optional tray
If paper is jammed in the optional Tray, follow the next steps to release the jammed paper.
1. Pull the optional Tray open. After you pull it
all the way out, lift up the front part of the tray
slightly to release the tray from the machine.
2. If you see the jammed paper, remove the paper
from the machine by gently pulling it straight out
as shown below.
Alignment and Troubleshooting
3. Slide the tray back into the machine and close
the two jam covers.
4. Open the front cover.
5. Pull the jammed paper out in the direction
shown. To avoid tearing the paper, pull it out
gently and slowly.
6. Close the front cover firmly. The machine will
resume printing.
4-12