Dell 2135cn Service Manual page 549

Hide thumbs Also See for 2135cn:

Table of Contents

Chapter 3 Removal and Replacement Procedures (RRPs)

Removal 25 PWBA LVPS (PL10.6.16)

Note: Use the wrist strap to protect the PWB from the electrostatic.

1) Remove the Tray 1. (Removal 1)

2) Open the COVER ASSY FRONT (PL10.2.1).

Note: Cover the drum of the PHD unit to avoid exposure to light.

3) Remove the PHD Unit. (Removal 3)

Note: The FUSER part is very hot. Take added care not to get burned when performing the

service operation.

4) Remove the FUSER ASSY. (Removal 9)

5) Remove the COVER ASSY SIDE R. (Removal 10)

6) Remove the COVER ASSY SIDE L. (Removal 14)

7) Remove the COVER REAR. (Removal 17)

8) Disengage all the connectors of the

PWBA LVPS (PL10.6.16).

9) Remove the six screws (silver, with

flange, 6mm) that fix the PWBA LVPS to

the printer.

Chapters

Table of Contents