Initial Setting - Konica Minolta bizhub C450 Copy Operations

Hide thumbs Also See for bizhub C450:

Table of Contents

Initial setting

Specify the default settings for Copy mode.

The copy settings selected when the machine is turned on (the pow-

er switch is set to "n") or the [Reset] key is pressed can be specified.

• Current Setting:

The settings specified from the touch panel before Utility mode

was entered are set as the default settings for Copy mode.

• Factory Default:

The factory default settings are set as the default settings for

To change the default settings for Scan mode or Fax mode, press the

[Scan] or [Fax] key, enter Utility mode, and then select a setting for this

For details on the default settings and the factory default settings, refer

to "Automatically canceling the settings (automatic panel reset)" on

Default Setting

Factory Default