Utility
7
Fold the paper in half while aligning the
corners of the printed test pattern.
8
Check the angle of the horizontal lines
in the test pattern.
–
If horizontal lines A and B are an-
gled as shown below, touch [–] to
reduce the value of q (between –1
dot and –10 dots).
–
If horizontal lines A and B are an-
gled as shown below, touch [+] to
increase the value of q (between 1
dot and 10 dots).
–
Each time [+] or [–] is touched, the
value is increased or decreased by
one increment.
–
If horizontal lines A and B are
aligned, skip to step 11.
9
Press the [Start] key.
The adjusted test pattern is printed.
When is the adjustment applied?
?
C450
12
A
B
A
B
A
B
12-53