Konica Minolta bizhub C450 Copy Operations page 502

12
Parameter
Printer Ad-
justment
Finisher
Adjust-
ment
Density
Adjust-
ment
12-30
Description
Leading Adjust the starting print position be-
Edge tween –3.0 and 3.0 mm from the current
Adjust- position at the leading edge of the paper
ment (with respect to the paper feed direc-
tion). Adjustments can be specified for
each paper type.
Centering Adjust the starting print position be-
tween –3.0 mm and 3.0 mm at the left
edge of the paper (with respect to the
paper feed direction). Adjustments can
be specified for each paper drawer.
Centering Adjust the starting print position be-
(Duplex tween –3.0 mm and 3.0 mm at the left
2nd Side) edge of the paper for the second side
during automatic double-sided copying.
Adjustments can be specified for each
paper drawer.
Vertical The administrator can change the set-
Adjust- tings for these Service mode parame-
ment ters.
For details, contact your technical repre-
Erase
sentative.
Leading
Edge
Center Adjust the center stapling position be-
Staple tween –7 mm and 7 mm for printing with
Position the "Fold & Staple" setting.
Half-Fold Adjust the center folding position be-
Position tween –7 mm and 7 mm for printing with
the "Half Fold" setting.
Thick Pa- Adjust the image density for printing on
per Image thick paper, overhead projector trans-
Density– parencies, or envelopes. The density can
Yellow be adjusted separately for each color
(yellow, magenta, cyan and black for a
Thick Pa-
color image and the black image densi-
per Image
ty). The higher the setting, the darker the
Density–
density.
Magenta
Adjust the setting for yellow, magenta,
cyan and black between –5 and +5.
Thick Pa-
Adjust the setting for "Black Image Den-
per Image
sity" between –2 and +2.
Density–
Cyan
Thick Pa-
per Image
Density–
Black
Black Im-
age Densi-
ty
Utility
Default Setting
0.0 mm
0.0 mm
0.0 mm
0 mm
0 mm
0
0
0
0
0
C450