To Copy Using The "Ohp Interleave" Function - Konica Minolta bizhub C450 Copy Operations

8

To copy using the "OHP Interleave" function

0 The Finishing setting cannot be changed.
0 The number of copies is set to "1" and cannot be changed.
1
Position the document to be copied.
– For details on positioning the document, refer to "Feeding the doc-
ument" on page 3-9.
2
Load overhead projector transparencies into the bypass tray or the 1st
drawer. Load the interleaf paper into the desired paper drawer.
– Use interleaf paper with the same size as the overhead projector
transparencies, and load them in the v orientation.
3
Touch [OHP], and then touch [OK].
– If the overhead projector transparencies are loaded into the 1st
drawer, touch [Paper], select the 1st drawer, and then touch
[Change Tray Settings].
The Paper screen appears.
4
Touch [Application], and then touch [Sheet/Cover/Chapter Insert].
8-4
Application functions
C450