Konica Minolta bizhub C450 Copy Operations page 89

Before making copies
No. Part Name
7 [Copy] key
8 [Reset] key
9 [Interrupt] key
10 Auxiliary power button
11 [Stop] key
12 [Start] key
13 Main Power indicator
14 Data indicator
15 [Proof Copy] key
16 Keypad
17 [C] (clear) key
18 [Mode Check] key
19 [Utility/Counter] key
20 [Mode Memory] key
21 Contrast dial
22 [Enlarge Display] key
C450
Description
Press to enter Copy mode. (As a default, the
machine is in Copy mode.)
While the machine is in Copy mode, the indicator
on the [Copy] key lights up in green.
Press to clear all settings (except programmed
settings) entered in the control panel and touch
panel.
Press to enter Interrupt mode.
While the machine is in Interrupt mode, the
indicator on the [Interrupt] key lights up in green
and the message "Now in Interrupt mode." appears
on the touch panel. To cancel Interrupt mode, press
the [Interrupt] key again.
Pressed to turn on/off machine operations, for ex-
ample, for copying, printing or scanning. When
turned off, the machine enters a state where it con-
serves energy.
Press the [Stop] key during copying to stop the
copy operation.
Press to start copying. When this machine is ready
to begin copying, the indicator on the [Start] key
lights up in green. If the indicator on the [Start] key
lights up in orange, copying cannot begin.
Press to restart a stopped job. For details on jobs,
refer to "Managing jobs (Job list)" on page 11-3.
Lights up in green when the machine is turned on
Flashes in green while a print job is being received
Lights up in green while a print job is queued to be
printed or while it is printing.
Press to print a single sample copy to be checked
before printing a large number of copies. (See
p. 4-6.)
Use to type in the number of copies to be
produced.
Use to type in the zoom ratio.
Use to type in the various settings.
Press to erase a value (such as the number of
copies, a zoom ratio, or a size) entered using the
keypad.
Press to display screens showing the specified
settings.
Press to display the Meter Count screen and the
Utility screen.
Press to register the desired copy settings as a pro-
gram or to recall a registered copy program. (See
p. 4-16.)
Use to adjust the contrast of the touch panel.
Press to enter Enlarge Display mode.
2
2-19