Erasing Specified Areas Of Copies ("Erase" Function); To Copy Using The "Erase" Function - Konica Minolta bizhub C450 Copy Operations

8
8.12

Erasing specified areas of copies ("Erase" Function)

Copies can be produced by erasing unwanted areas around the document,
such as the transmission information on received faxes and the shadows of
punched holes.
With frame erasing, the same width can be erased along all four sides of the
document or a different width can be erased along each side of the docu-
ment.

To copy using the "Erase" function

1
Position the document to be copied.
– For details on positioning the document, refer to "Feeding the doc-
ument" on page 3-9.
2
Touch [Application], and then touch [Erase].
– To cancel all settings for the Application functions, touch [Reset].
The Erase screen appears.
8-48
Application functions
A
A: 0.0 mm to 50.0 mm
C450