Konica Minolta bizhub C450 Copy Operations page 306

5
Message
Replenish paper.
Toner cartridge (X) needs
to be replaced soon.
Replace the Toner Car-
tridge.
Stapler empty. Replace
Staple Cartridge or can-
cel Staple mode.
Misfeed detected.
Reinsert the following #
of originals.
Malfunction detected.
Please call your Techni-
cal Representative.
If any message other than those listed above appears, perform the operation
described in the message.
5-48
Cause
The indicated drawer has run
out of paper.
The toner for the indicated
color is about to run out.
Since the toner for the indi-
cated color has run out, the
machine is unable to make
copies.
The staples have run out.
Since a paper misfeed oc-
curred, the machine is unable
to make copies.
After clearing a paper mis-
feed, it is necessary to reload
certain pages of the docu-
ment that have already been
fed through the reverse auto-
matic document feeder.
The machine malfunctioned
and is unable to make copies.
Troubleshooting
Remedy
Load paper into the indicated draw-
er. (See "Loading paper into the 1st
drawer" on page 2-45, "Loading pa-
per into the 2nd, 3rd or 4th drawer"
on page 2-50, "Loading paper into
the LCT" on page 2-53, and "Load-
ing paper into the bypass tray" on
page 2-56.)
Prepare to replace the toner car-
tridge according to your mainte-
nance agreement.
Replace the toner cartridge accord-
ing to your maintenance agreement.
Replace the staple cartridge. See
"Replacing the staples" on
page 9-10.
Clear the paper misfeed. (See
"When the message "Misfeed de-
tected." appears" on page 5-6.)
Load the indicated document pages
into the ADF.
Inform your technical representative
of the code displayed on the touch
panel.
C450