Basic copy operations
3.14
Scanning the next document to be copied while a
copy job is being printed (Next Job Reservation)
The settings for the next copy job can be specified and the document can be
scanned while a copy operation is being performed so that it can be printed
once the current copy operation is finished.
To reserve a copy job
0 Up to 61 copy jobs, including the current copy job, can be reserved.
0 A copy job can be reserved after scanning of the loaded document is fin-
ished. A copy job cannot be reserved while a document is being scanned.
0 If Utility Setting parameter "Copy Operating Screen" is set to "ON", [Pro-
gram Next Job] appears. Touch [Program Next Job], and then specify the
copy settings for the next copy job.
For details on specifying the "Copy Operating Screen" parameter, refer
to "Display setting" on page 12-19.
0 For details on positioning the document, refer to "Feeding the document"
on page 3-9.
0 To cancel a reserved copy job, display the Basic screen for the reserved
copy job, and then press the [Stop] key. For details, refer to "Performing
operations on jobs" on page 11-7.
1
Press the [Start] key to begin scanning and outputting the current copy
job.
–
The Basic screen for reserving a copy job appears
.
C450
3
3-85