To Place The Document On The Original Glass - Konica Minolta bizhub C450 Copy Operations

Basic copy operations

To place the document on the original glass

0 For details on the types of documents that can be placed on the original
glass, refer to "Original documents" on page 7-25.
0 When placing the document on the original glass, be sure to lift open the
ADF at least 20°.
If the document is placed on the original glass without the reverse auto-
matic document feeder being lifted at least 20°, the correct document
size will not be detected.
0 Do not place objects weighing more than 2 kg on the original glass. In ad-
dition, do not press down extremely hard on a book spread placed on the
original glass, otherwise the original glass may be damaged.
0 For thick books or large objects, make the copy without closing the ADF.
When a document is being scanned with the ADF open, do not look di-
rectly at the light that may shine through the original glass. Although the
light that shines through the original glass is bright, it is not a laser beam
and, therefore, is not as dangerous.
1
Lift open the ADF.
2
Position the document face down onto the original glass.
– Load the document pages so that the top of the document is to-
ward the back or the left side of the machine.
C450
When loaded in the
v orientation:
When loaded in the
w orientation:
3
3-11