Atm Oam Modify - THOMSON 516 Reference Manual

ATM Commands

atm oam modify

Modify the ATM OAM data blocking mode.
SYNTAX:
atm oam modify
where:
port The port for which OAM blocking is configured.
Choose between:
Or specify a port number (dsl0 has port number 0).
blocking Enable or disable the OAM data blocking mode on this port.
The default is enabled.
EXAMPLE:
=>atm oam list
OAM config dump
-------------------
CLP bit value : 1
Loopback id
OAM data blocking mode
--------------------------
Port dsl0: blocking
Port dsl1: blocking
Port atm2: blocking
Port atm3: blocking
Port aal5: blocking
Port atm5: blocking
=>atm oam modify port=dsl1 blocking=disabled
=>:atm oam list
OAM config dump
-------------------
CLP bit value : 1
Loopback id
OAM data blocking mode
--------------------------
Port dsl0: blocking
Port dsl1: non blocking
Port atm2: blocking
Port atm3: blocking
Port aal5: blocking
Port atm5: blocking
=>
RELATED COMMANDS:
atm oam config
atm oam list
40
port = <{dsl0} or number>
blocking = <{disabled | enabled}>
DSL0
: 6a 6a 6a 6a 6a 6a 6a 6a 6a 6a 6a 6a 6a 6a 6a 6a
: 6a 6a 6a 6a 6a 6a 6a 6a 6a 6a 6a 6a 6a 6a 6a 6a
Modify the ATM Operation and Maintenance (OAM) settings.
Display the ATM OAM settings.
REQUIRED
REQUIRED
E-DOC-CTC-20060414-0002 v1.0