hostmgr config
Configure the host manager parameters.
SYNTAX:
hostmgr config
[state = <{disabled | enabled}>]
[scantime = <number{10-600}>]
[autosave = <{disabled | enabled}>]
[trace = <{disabled | enabled}>]
where:
state
Enable or disable the host manager daemon.
The default is enabled.
scantime
A number between 10 an 600 (seconds).
Represents the time between two scans.
The default is
autosave
Enable or disable automatic saves to flash memory.
The default is enabled.
trace
Enable or disable the host manager traces.
The default is disabled.
EXAMPLE:
=>hostmgr config
state
: enabled
scantime : 30 sec.
autosave : enabled
trace
: disabled
=>
E-DOC-CTC-20060414-0002 v1.0
30
(seconds).
Hostmgr Commands
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
345