Service System Ifadd - THOMSON 516 Reference Manual

service system ifadd

Add an interface group to the access list.
SYNTAX:
service system ifadd
where:
name The name of the system service for this access list.
group The interface group for this access list.
EXAMPLE:
=>service system list name=SIPPBX expand=enabled
Idx Name Protocol
---------------------------------------------------------------------------------
1 SIPPBX udp
Description................ SIP PBX, registrar and proxy
Properties................. server
Managed parameters......... state port acl map log
Source Ip Selection........ auto
Interface Access List...... any
Ip Access List............. any
NAT Port List.............. 5060
=>service system ifadd name=SIPPBX group=lan
=>service system list name=SIPPBX expand=enabled
Idx Name Protocol
---------------------------------------------------------------------------------
1 SIPPBX udp
Description................ SIP PBX, registrar and proxy
Properties................. server
Managed parameters......... state port acl map log
Source Ip Selection........ auto
Interface Access List...... lan
Ip Access List............. any
NAT Port List.............. 5060
=>
RELATED COMMANDS:
service system ifdelete
E-DOC-CTC-20060414-0002 v1.0
name = <string>
group = <{wan|local|lan|tunnel|dmz|guest} or number>
SrcPort DstPort
5060
SrcPort DstPort
5060
Delete an interface group from the access list.
Group State
disabled
Group State
disabled
Service Commands
REQUIRED
REQUIRED
573