Dhcp Relay Ifconfig - THOMSON 516 Reference Manual

DHCP Commands

dhcp relay ifconfig

Configure a DHCP relay interface.
SYNTAX:
dhcp relay ifconfig
where:
intf The name of the dynamic interface to be configured.
relay Set the relay status to enabled or disabled.
The default is disabled.
maxhops A number between 0 and 16.
Represents the maximum number of hops allowed in the DHCP packet.
The default is 4.
remoteid Set the remote ID as specified in RFC3046.
trusted Drop/forward DHCP request packet when the DHCP Relay Agent Option is enabled
(with the command :dhcp relay config agentinfo=enabled) and the giaddr
field is 0 (RFC3046)) (enabled) or not (disabled).
The default is disabled.
130
intf = <string>
[relay = <{disabled | enabled}>]
[maxhops = <number{0-16}>]
[remoteid = <password>]
[trusted = <{disabled | enabled}>]
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
E-DOC-CTC-20060414-0002 v1.0