Atm Bundle Ifadd - THOMSON 516 Reference Manual

ATM Commands

atm bundle ifadd

Add an interface on a bundle.
Up to 8 interfaces or (sub-)bundles can be added to one bundle.
SYNTAX:
atm bundle ifadd
where:
name The name of the bundle to which an ATM interface must be added.
intf The name of the ATM interface to be added.
index A number between 0 and 6.
Represents the index of the ATM interface.
EXAMPLE:
=>atm bundle ifadd name=myBundle intf=myATMintf
=>atm bundle list
myBundle: Connection state : not-connected
Retry: 15
TX requested bytes: 0
TX bytes: 0
RX bytes: 0
Interface: myATMintf
=>
RELATED COMMANDS:
atm bundle ifdelete
28
name = <string>
intf = <string>
[index = <number{0-6}>]
Policy: connection
requested frames: 0
frames: 0
frames: 0
State: enabled
TX bytes: 0
RX bytes: 0
RX discarded bytes: 0
Disconnects: 0
Remove an interface from a bundle.
Selector: 0-15
frames: 0
frames: 0
discarded frames: 0
REQUIRED
REQUIRED
OPTIONAL
E-DOC-CTC-20060414-0002 v1.0