Firewall Debug Traceconfig - THOMSON 516 Reference Manual

Firewall Commands

firewall debug traceconfig

Configure the firewall trace options.
SYNTAX:
firewall debug traceconfig
where:
tcpchecks Disable or enable tcpchecks traces.
The default is disabled.
udpchecks Disable or enable udpchecks traces.
The default is disabled.
icmpchecks Disable or enable icmpchecks traces.
The default is disabled.
sink Specify the action traced by the firewall for sink traffic.
The default is none.
forward Specify the action traced by the firewall for forward traffic.
The default is none.
source Specify the action traced by the firewall for source traffic.
The default is none.
EXAMPLE:
=>firewall debug traceconfig
Trace Config
============
tcpchecks
icmpchecks
sink
forward
source
=>
314
[tcpchecks = <{disabled | enabled}>]
[udpchecks = <{disabled|enabled}>]
[icmpchecks = <{disabled | enabled}>]
[sink = <{none | all | accept | deny | drop
[forward = <{none | all | accept | deny | drop
[source = <{none | all | accept | deny | drop
: disabled
: disabled
: none
: none
: none
| reset} or number>]
reset} or number>]
| reset} or number>]
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
E-DOC-CTC-20060414-0002 v1.0