Nat Maplist - THOMSON 516 Reference Manual

NAT Commands

nat maplist

Display the address mapping for a NAT enabled interface.
SYNTAX:
nat maplist
where:
intf The IP interface name.
Note
expand Enable or disable expanded listing.
The default is disabled.
EXAMPLE:
=>nat maplist
Idx Type Interface
1 NAPT myPPP_ppp
1 NAPT eth0
2 NAPT eth0
3 NAPT eth0
=>maplist intf=myPPP_ppp expand=enabled
Idx Type Interface
1 NAPT myPPP_ppp
=>
RELATED COMMANDS:
nat mapadd
nat mapdelete
516
[intf = <string>]
[expand = <{disabled | enabled}>]
If not specified, the address mapping for all the NAT enabled interfaces will
be shown.
Outside Address
100.100.100.1
any:80
any:1080
any:8080
Outside Address
100.100.100.1
Access List................... 10.0.0.0/24
Foreign Address............... any
Protocol...................... any
Flags......................... Static
Description................... Outbound NAPT without defserver
Add an address mapping to a Network Address Translation (NAT) enabled
interface.
Delete an address mapping from a NAT enabled interface.
Inside Address Use
unmapped 0
127.0.0.1:8080 0
127.0.0.1:8080 0
127.0.0.1:8080 0
Inside Address Use
unmapped 0
OPTIONAL
OPTIONAL
E-DOC-CTC-20060414-0002 v1.0