Ppp Ifadd - THOMSON 516 Reference Manual

ppp ifadd

Create a new PPP interface.
SYNTAX:
ppp ifadd intf = <string>
where:
intf The name for the new PPP interface.
Note
If not specified, the destination parameter must be specified. In this case the
name of the destination will double as interface name.
EXAMPLE:
=>ppp iflist
Internet: dest : RELAY
Retry : 10
mode = IP routing
flags = echo magic accomp restart mru addr savepwd demanddial
dns metric = 0 mru = 1492
auth = auto user =
admin state = down
LCP : state = initial
IPCP: state = initial
acname : --- service : ---
=>ppp ifadd intf=Rt_PPPoA
=>ppp iflist
Internet: dest : RELAY
Retry : 10
mode = IP routing
flags = echo magic accomp restart mru addr savepwd demanddial
dns metric = 0 mru = 1492
auth = auto user =
admin state = down
LCP : state = initial
IPCP: state = initial
acname : --- service : ---
Rt_PPPoA: dest : [00:00:00]
Retry : 10
mode = IP routing
flags = echo magic accomp restart mru addr savepwd
dns metric = 0 mru = 1500
auth = auto user =
admin state = down
LCP : state = initial
IPCP: state = initial
=>
RELATED COMMANDS:
ppp ifdelete
ppp iflist
E-DOC-CTC-20060414-0002 v1.0
[00:00:00]
Tx inactivity = 1200s
password =
oper state = down link state = not-connected
retransm = 10 term. reason =
retransm = 0 term. reason =
[00:00:00]
Tx inactivity = 1200s
password =
oper state = down link state = not-connected
retransm = 10 term. reason =
retransm = 0 term. reason =
password =
oper state = down link state = not-connected
retransm = 10 term. reason =
retransm = 0 term. reason =
Delete a PPP interface.
Display the PPP interfaces.
left = 0s
left = 0s
PPP Commands
REQUIRED
525