Snmp Community Add - THOMSON 516 Reference Manual

SNMP Commands

snmp community add

Configure an SNMP community string to allow SNMP access over IP.
SYNTAX:
snmp community add
where:
securityname
communityname
EXAMPLE:
=>snmp community add
securityname = RWCommunity
communityname = *******
Please retype communityname for verification.
communityname = *******
:snmp community add securityname=RWCommunity communityname=_DEV_2C6A78E1C41E7B01
=>snmp community add
securityname = ROCommunity
communityname = ******
Please retype communityname for verification.
communityname = ******
:snmp community add securityname=ROCommunity communityname=_DEV_184B05F89719A74E
=>
RELATED COMMANDS:
snmp community delete
snmp community list
588
securityname = <{RWCommunity | ROCommunity}>
communityname = <password>
Configure access rights/restrictions control for the community name.
Choose between:
RWCommunity: read/write access rights
ROCommunity: read only access rights.
Configure the SNMP community name.
Delete an SNMP community string to prevent SNMP access over IP.
List all SNMP community strings in use for SNMP access over IP.
REQUIRED
REQUIRED
E-DOC-CTC-20060414-0002 v1.0