Label Rule Modify - THOMSON 516 Reference Manual

Label Commands

label rule modify

Modify a label rule.
SYNTAX:
label rule modify
If a value is preceded by a "!", it means "NOT".
For example "srcintf=!wan" means "if srcintf is different from WAN".
where:
chain The name of the chain which contains the rule.
index The number of the rule in the chain.
newindex The new number of the rule in the chain.
name The name of the new rule.
clink The name of the chain to be parsed when this rule applies.
srcintf The name of the source interface expression.
srcip The name of the source IP expression.
dstip The name of the destination IP expression.
serv The name of the device expression.
log Disable or enable logging when this rule applies.
state Disable or enable this rule.
label Choose between:
458
chain = <chain name>
index = <number>
[newindex = <number>]
[name = <string>]
[clink = <chain name>]
[srcintf [!]= <string>]
[srcip [!]= <{ip address | private}>]
[dstip [!]= <{ip address | private}>]
[serv [!]= <{service name}>]
[log = <{disabled | enabled}>]
[state = <{disabled | enabled}>]
[label = <string>]
None
link (when clink is used)
label name.
REQUIRED
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
E-DOC-CTC-20060414-0002 v1.0