Label Rule Modify - THOMSON TG784-SIP Cli Reference Manual

label rule modify

Modify a rule.
SYNTAX:
label rule modify
where:
chain
index
newindex
name
clink
[!]srcintf]
[!]srcip]
[!]dstip]
[!]serv]
log
state
label
578
chain = <chain name>
[index = <number>]
[newindex = <number>]
[name = <string>]
[clink = <chain name>]
[[!]srcintf] = <chain name>]
[[!]srcip] = <chain name>]
[[!]dstip] = <chain name>]
[[!]serv] = <chain name>]
[log = <{disabled|enabled}>]
[state = <{disabled|enabled}>]
[label = <{None|link|DSCP|Interactive|
Management|Video|VoIP-RTP|VoIP-Signal|
default}>]
The name of the chain which contains the rule.
The index of the rule in the chain.
The new index of the rule in the chain.
The name of the new rule.
The name of the chain to be parsed when this
rule applies.
The name of the source interface expression.
If a value is preceded by a "!", it means NOT.
The name of the source ip expression.
If a value is preceded by a "!", it means NOT.
The name of the destination ip expression.
If a value is preceded by a "!", it means NOT.
The name of the service expression.
If a value is preceded by a "!", it means NOT.
Disable/Enable logging when this rule applies.
Disable/Enable this rule.
None, link (when clink is used) or label name.
label Commands
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
E-DOC-CTC-20080619-0007 v1.0