Toshiba Tosvert VF-AS1 Instruction Manual page 253

No. Option name
LED Remote Keypad
option
(with parameter copy
(7)
function)
LCD Remote Keypad
option
(8)
USB communication
converter unit
(for communication with
(9)
multiple inverters)
Communication cable
(10)
Operation panel
(11)
heat sink outside
(12)
protrusion option
Extention operation panel unit with parameter copy function. Includes LED display,
RUN/STOP key, UP/DOWN key, MODE key, ENT key, EASY key, and COPY MODE key.
(When using this unit, set as follows:  (common serial transmission waiting time) =
 (default setting). Use communication cable No. 10 to connect to the inverter.
Panel type: RKP002Z
Cable type:CAB0011 (1m), CAB0013 (3m), CAB0015 (5m)
This LCD operation panel unit can be installed to the inverter unit. Includes LCD display,
RUN key, STOP/RESET key, job dial, ESC key, FWD/REV key and F1 to F4 key.
Special cable is needed to connect the inverter and LCD panel.
Panel type: RKP004Z
LCD cable type: CAB0071 (1m), CAB0073 (3m), CAB0075 (5m) , CAB00710 (10m)
More than one inverter can be controlled with a personal computer and so on if this unit is
used for connection between inverters and personal computer.
• Computer link: Since this unit makes it possible to connect inverters with higher-class
computer, FA computer, etc., a data communication network can be
constructed among multiple inverters.
Unit type: USB001Z
For RS485/USB communication (between inverter and RS485/USB communication
conversion unit)
Cable type: CAB0011 (1m), CAB0013 (3m), CAB0015 (5m)
A frequency meter, frequency setup device, RUN/STOP (forward, reverse) switch are built in
this operation panel. (Model: CBVR-7B1)
This allows is heat generated inside panels to be reduced
J-5
Function, purpose.
E6581442
10