Toshiba Tosvert VF-AS1 Instruction Manual page 226

(Continued)
Communication
No.
FE56
FD85
FD86
FD52
FE84
Note 1: If any value other than the values in the above table is specified, the number "" is displayed.
Note 2: If a negative value of signed signal is specified, the negative sign "-" is displayed. When the negative sign "-"
is displayed, do not display "", "", "". When read through by communications device, the negative sign is
affixed only FE18~FE20, FE37 and FE38 values..
Note 3: Data set with FA65-FA79 is displayed.
 For details, refer to Instruction Manual (E6581315) specified in Section 6.42.
Note 4: Unit of display is able to change depends on ~  setting.
Note 5: If monitor this item, operate a motor in automatic torque boost mode or vector control mod (=,,, or
)
8
Default
Item displayed
setting
 RP
 COUNT1
 COUNT2
 PID result frequency
Synchronous speed frequency

command
Marking





H-8
E6581442
Unit
Unit (Panel)
(Communication)
0.1% 0.01%
1 1
1 1
0.1Hz 0.01Hz
0.1Hz 0.01Hz